Step by step guide on how to change the belt on a Samsung washing machine

Washing machines of the Samsung trademark are widely represented in the domestic market. Their popularity is due to their high reliability and the use of innovative technologies.

But even this technique is not immune to possible breakdowns. One option is to replace the belt. Such work belongs to the repair of medium complexity, and you can even do it yourself.

How to change the belt on a Samsung washing machine (remove the old one, put on a new one), we will tell in the article.

Signs that a part needs replacement

Belt replacement is not a common problem. The deterioration of the part can make itself felt during prolonged or improper operation of the washing machine.

The average life of a washing machine belt is 6 years. It is normal to have to replace it for longer periods of time.

Improper operation can accelerate part wear with regular violation of the rules, for example, overloading the laundry.

In some cases, problems with the drive belt may be indicated by a complete stop of the washing machine and the issuance of an E4 code on the display, UE, UB. On machines not equipped with a display, all mode lamps are blinking and the second temperature indicator from the top is on.

A drive belt problem is not always accompanied by an error code.

It is necessary to pay attention to the following failure situations:

• when water is drawn into the drum and the motor is running, the drum does not rotate;
• the engine runs intermittently;
• after the start of the work cycle, despite the operation of the engine, a hang occurs;
• free rotation of the drum when the engine is not running.
• uncharacteristic noise during washing.

If the part itself has a rough surface, pellets have formed on the surface and on the elements that are in contact with the belt, delamination, then replacement is definitely needed. But this can only be determined by direct access.

Preparation for the process

Replacing the drive belt is carried out with a partial disassembly of the structure of the washing machine. Therefore, you need to prepare:

1. If there is water in the washing machine, it must be drained, and the laundry must be removed from the drum.
2. Disconnect the device from all communications. Turn off the machine not only with a button, but also pull out the plug from the socket.
3. Move the machine away so that the rear wall can be accessed.
4. Prepare tools - a set of screwdrivers.

If the part has flown off for the first time and has no visual damage, it can simply be returned to its place without replacement.

Two options for accessing the belt

The strap can be accessed from the back of the washing machine if it is removable or from the top.

The procedure for clippers with a removable back panel:

1. Unscrew all self-tapping screws that hold this cover.
2. Remove the cover. This allows for a good overview and convenience when replacing a part.

Otherwise, you will have to work through the top of the machine. For this, the actions will be as follows:

• unscrew the screws that hold the top cover;
• slightly push the cover towards the rear wall so that it is removed from the grooves;
• remove the cover.

The direct procedure for replacing the belt does not depend on the method of access to the part.

How to install a new one?

In order to replace the belt, you must first dismantle the old one, and then install the new part. First you need to determine if it is on the drum pulley. If it is not there, then it probably broke or completely flew off and fell to the bottom.

How to tighten a new belt? Procedure for clippers with non-removable back side:

1. The machine must be tilted towards you so that the tank sags towards the hatch, and the gap between it and the rear wall becomes larger.
2. The old part must be pry off with a screwdriver and removed from the pulley by sliding.
3. While holding the belt, you need to rotate the pulley. This will help loosen the rubber or polyurethane part.
4. Use a flashlight to illuminate the work area to see if any part of the belt has not been removed if it is frayed as a result of wear. If they are found, it is imperative to remove all fragments so that they do not interfere with normal operation in the future.
5. Slide the new part onto the engine pulley. If you have to work over the top of the machine, you can use a second person to pick up the belt from the bottom. Or help yourself hook it by lowering it on a wire loop.
6. After the part is thrown over the engine, it is necessary to pull it over the grooves of the pulley. This must be done by holding the belt itself taut and turning the pulley clockwise.
7. Rotate the pulley to make sure the belt is in place.
8. Assemble the washing machine upside-down.
9. Start test wash.

How to choose, how much to pay and where to buy?

The best option is to replace the belt with an original one that fully meets all the parameters of the washing machine. The part should be chosen taking into account the characteristics of your washing machine, therefore you can just take off the worn one and buy exactly the same.

An important parameter for multi-ribbed belts is the distance between the wedges. For Samsung, type "J" is well suited, which means a distance of 2.34 mm. This parameter is indicated on the part itself.

Near the letter on the surface itself, the number of wedges is indicated... There can be up to 5 of them. J3 is suitable for narrow Samsung devices, J5 for wide ones.

The length of the belt is also indicated directly on it. This is an important parameter that cannot be ignored, otherwise the part will not fit the machine.

For Samsung cars - 1270. So, marking 1270 J3 indicates a multi-ribbed three-ribbed belt with J-type wedges and a total length of 1270.

Belts are made of rubber and polyurethane. It is even possible to determine the type of material visually: rubber is black, polyurethane is light... The former are distinguished by a longer service life.

A good three-ribbed belt 127 cm Megadyne (made in Italy) costs from 420 rubles. One of the cheaper options is also suitable, which can be ordered, for example, on Yandex.Market or bought in a specialized store.

Prices for simpler versions of the product - from 200 rubles. They are inferior in quality and less durable, but gain in price. A wider belt has better grip and less slippage.

Master's call: the price of the issue

If it is impossible to replace the drive belt yourself, you must call a master from a company that repairs household appliances. You can find a company on the Internet. A professional master will do all the work, carry out diagnostics and give recommendations.

When calling a specialist to replace a belt, you must indicate the make of the machine, as well as whether there is a new part in stock or the master needs to bring it with him. If in addition the master has to eliminate other malfunctions, the amount will be higher.

For machines that are still under warranty, call a specialist only from the service center... All information about such companies must be included in the documents for the washing machine.

Contacting masters for private ads can be dangerous, since there is a significant likelihood of getting caught on unscrupulous workers, weak specialists, or just scammers. To eliminate the risk will help contacting a company that has been in the service provision market for a long time.

All the most important and useful about the repair of Samsung washing machines - in this section.

Related videos

The video will tell you how to change the drive belt in the washing machine:

Conclusion

You can change the belt on the Samsung washing machine yourself, even if the back wall of the device is not removable. But if you need a serious diagnosis of work, and other breakdowns, it is advisable to seek the help of a specialist.